#HOW TO CHANGE MY WIFI ROUTER 3.0 TO WPA SERIAL#
#HOW TO CHANGE MY WIFI ROUTER 3.0 TO WPA PASSWORD#
#HOW TO CHANGE MY WIFI ROUTER 3.0 TO WPA MAC#

в‘ If there is an old wireless router in your home, please connect wireless router to cable modem, and power off and restarted the modem to make the wireless router can access the internet. If you powered off and restarted both modem and Mesh, cannot detect DHCP connection type still, please follow the below steps: в‘ў If the above situation is excluded, please reset the repeater, and try to connect the repeater to the router again.ДЎ.Power off and power on modem and Mesh both, and then connect Mesh to the modem with an ethernet cable, when the light turns to blink green, phone connect to Mesh WI-FI signal and reconfigure Mesh through RS WiFi APP Дў. в‘Ў Check if the antenna of the repeater and router is paralleled, a paralleled antenna will be better for the connection. в‘ Check the placement of the repeater, avoid putting it in the corner When the network speed is faster than that at repeater, please check the following problems: When the network speed between the router and repeater is the same, it means the connection is fine. Under general situation, when the signal strength that received by the repeater is between 40% and 79% (While the interface shows a signal with 2 bars), the repeater works best at this time.Д¬heck the network speed when your device connect the router directly at that position.ДЄ. It is recommended to move the repeater closer, and the repeater antenna is parallel to the router. в‘ў No light: The signal strength received by repeater is below -74db. It is recommended to move the repeater a little closer, and the repeater antenna is parallel to the router.) в‘Ў Solid red: The signal strength received by repeater is above -61db~-74db. View the color of the indicator: в‘ Solid blue: The signal strength received by the repeater is above -60db.

#HOW TO CHANGE MY WIFI ROUTER 3.0 TO WPA SERIAL#

в‘§ If all these situations are excluded, please send your feedback to this email: the information includes the superior model, extender serial number, and other information.

#HOW TO CHANGE MY WIFI ROUTER 3.0 TO WPA PASSWORD#

в‘¦ Modify the signal name and password for the superior router and reset the repeater. в‘Ґ Confirm the password of your superior router you entered is correct.(The password entered in the extension process is the password for the superior router)

#HOW TO CHANGE MY WIFI ROUTER 3.0 TO WPA MAC#

в‘¤ Login the interface of the router to check if restrictions are made, such as MAC filter, Blacklist. в‘Ј Confirm the superior signal is not turned off or hidden. в‘Ў Move the repeater closer to the router в‘ў Confirm the encryption mode of the superior signal is not WEP.(Only no encryption, WPA-PSK, WPA2-PSK, or their mixed mode can be supported by our repeater) в‘ Set the SSID of the router and repeater to numbers and letters combination If you canвЂ™t find the superior signal when extending, please try the following solutions: enter the interface.Д¬heck the indicator is blue/red/not bright(if the indicator not bright, it means a failed matching). Open a browser, enter the IP address in the address bar, and use the created password in the first time to log in to the extender website. After finding the mac address (that is attached to the product stick)of the repeater, you can get the IP address of the extender assigned by the router. Open the Client List of the router interface to view connected devices. If the last step above doesnвЂ™t work, please change to a laptop or a mobile phone to log in.ДЇirst, make sure you have connected to the WiFi signal(no matter the routerвЂ™s or extenderвЂ™s), and then login the interface of the router If failed, please cut off the extender power supply and re-connect the power supply after the extender has been successfully extended the signal, the website window will automatically pop up on the screen. repeater signal is assigned by the superior router. Network Name (SSID) repeater is the same as the superior signal (the router signal), you have to confirm you are connected to the signal of the repeater.ДЄfter connecting to the repeater wireless signal, please confirm the extender gets connection with the correct router. There are two ways to deal with this problem:ДЇirst, make sure that you have connected to the correct signal of the repeater. If all the solutions above are not working, we recommend that you can restore factory settings or recharging the plugged in the socket, then try to connect and log in again. If still failed, please wipe all the or reopen the web browser reboot your mobile device.

If you are unable to login, please close the browser(but not just return) and open a new page to try again. (The name of its wireless signal is attached to the product sticker)Д¬onfirm the IP access (192.168.0.254) that entered in the address bar is correct. Please confirm you have connected to the correct signal of the repeater. Confirm the situation is before after extension.

How to change my wifi router 3.0 to wpa